Watch Settings; Setting The Time And Date; Configuring Dual Time Settings; Swapping Your Current Location Time And Dual Time Settings - Casio 5519 Operation Manual

Hide thumbs Also See for 5519:
Table of Contents

Advertisement

Watch Settings

Use the procedure below to configure current
location time and Dual Time settings
manually.
Getting ready
Perform this procedure in the Calendar Mode.
Use (A) to navigate to the Calendar Mode.
Navigating Between Modes
l
Calendar Mode

Setting the Time and Date

While the watch is connected to a phone, it will
automatically adjust its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock and enables the hour and
minute setting operation.
Hours
Minutes
2.
Rotate the crown to adjust the hour and
minute settings.
The Dual Time setting is also adjusted
in accordance with the current time
setting. Crown operation is disabled
while the Dual Time setting is being
adjusted.
3.
Press (A).
This enables the month and day setting
operation.
Operation Guide 5519
4.
Press (B) to change the month.
5.
Rotate the crown to change the day.
6.
Press (A).
This enables the year 10's digit setting
operation.
7.
Rotate the crown to change the year 10's
digit.
Year (10's digit)
8.
Press (A).
This enables the year one's digit setting
operation.
9.
Rotate the crown to change the year one's
digit.
Crown
10.
On a time signal at the top of a minute,
push the crown back in.
Note
The day of the week is set
automatically in accordance with the
year, month, and day settings.
12
11
1
2
10
9
3
8
4
7
5
6
Month
Day
00
10
20
90
30
40
80
70
50
60
0
1
2
9
3
8
4
7
5
6
Year (one's digit)
Configuring Dual Time
Settings
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
Dual Time
Dual Time 24-hour
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o'clock.
2.
Rotate the crown to change the Dual Time
setting.
You can set the Dual Time in 15-minute
increments.
Dual Time hour hand
Dual Time minute hand
Dual Time 24-hour hand
3.
Push the crown back in.
Swapping Your Current
Location Time and Dual Time
Settings
You can swap the time in your current location
with the Dual Time by holding down (B) for
about three seconds.
Before swapping
After swapping
Current location time
Dual Time
Current location time
Note
If you are using the small hour and
minute hands for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.
Crown
Dual Time
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents