Auto Time Adjustment; Configuring World Time Settings - Casio 5519 Operation Manual

Note
You also need to perform the above
●
pairing procedure after switching to
a different phone or whenever
connecting to any phone for the first
time. In such cases you do not need
to unpair with the phone you have
been previously paired with.

Auto Time Adjustment

The watch can be set to adjust its time setting
automatically each day in accordance with the
phone time.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day. It performs the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to
●
perform auto time setting
adjustment under the conditions
described below.
While it is too far away from its
ー
paired phone
When communication is not
ー
possible due to radio interference,
etc.
While the phone is updating its
ー
system
Note
If there is a World Time City specified
●
with CASIO WATCH+, its time will
also be adjusted automatically.
The watch will connect with the
●
phone and perform auto time
adjustment at around 12:30 a.m.,
6:30 a.m., 12:30 p.m. and 6:30 p.m.
The connection is automatically
terminated after auto time
adjustment is complete.
Operation Guide 5519
Summer Time
●
Once the watch is connected with a phone and
its time is adjusted with the phone time, its
Home City time and World Time will
automatically switch between standard time
and summer time as required, even if the
watch is no longer connected with the phone.
Summer Time Switching
l
Changing the time setting manually with a
●
watch operation will cancel auto standard
time/summer time switching.
A CASIO WATCH+ screen shows
●
information about summer time periods.
Triggering Immediate Time Adjustment
●
The watch will adjust its time setting to that of
the phone immediately after they are
connected with each other. Whenever you
want to adjust the watch's time setting perform
the procedure below to connect with a phone.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Press (C).
This causes the second hand to move to
"R". The second hand will move to e when
a connection is established between the
watch and phone, and the time setting of
the watch will adjust to the phone's time
setting.
The connection is terminated
●
automatically after time adjustment is
complete.
Disabling Auto Time Correction
●
To stop the watch from automatically
connecting of your phone to adjust its time
settings, perform the operation below to
disable auto time correction.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (C) button for about 1.5
seconds.
The second hand will move to "R". Keep
●
(C) depressed until the second hand
starts moving again and then stop at
"R".
The second hand will move to e when a
●
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
"Watch settings".
4.
Y Tap "Time adjustment".
5.
Y Perform the operation shown on the
phone screen.
Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCH+ causes the city's time to be
indicated by the small hour and minute hands.
Watch settings can be configured for auto
summer time switching for the World Time
City.
Note
CASIO WATCH+ World Time lets
●
you select from among
approximately 300 cities as the
World Time City.
5