Stopwatch; Measuring Elapsed Time; Taking A Split Time Reading; Alarms - Casio 5519 Operation Manual

Stopwatch

The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds.
It can also measure split times.
Getting ready
Perform this procedure in the Stopwatch
Mode. Use (A) to navigate to the Stopwatch
Mode.
Navigating Between Modes
l
Stopwatch Mode

Measuring Elapsed Time

Seconds
Minutes
Hours
24-hour
1.
Use the operations below to measure
elapsed time.
B
Start
B
Stop
B
Resume
D
Stop
2.
Press (D) to reset the elapsed time to all
zeroes.
3.
Press (A) twice to return to the Calendar
Mode.
Operation Guide 5519

Taking a Split Time Reading

Minutes
Hours
1.
Use the operations below to measure
elapsed time.
* Each press of (D) causes the elapsed
time up to that point (split time) to be
indicated for 10 seconds.
2.
Press (D) to reset the elapsed time to all
zeroes.
3.
Press (A) twice to return to the Calendar
Speed Mode.
Note
The watch has enough memory to
●
store up to 100 split time records.
You can use CASIO WATCH+ to
view split time records.
Seconds
Speed
24-hour
B
Start
D
Split*
B
Stop

Alarms

The watch will beep when the alarm time is
reached.
Getting ready
Perform this procedure in the Alarm Mode.
Use (A) to navigate to the Alarm Mode.
Navigating Between Modes
l
Alarm Mode

Configuring Alarm Settings

1.
Pull out the crown to the first click.
This turns on the alarm.
Minutes
Hours
24-hour
Alarm on
2.
Rotate the crown to change the alarm time
setting.
3.
Push the crown back in.
4.
Press (A) once to return to the Calendar
Mode.

Turning the Alarm On or Off

Each press of (B) toggles the alarm between
on and off.
ON OFF

Stopping an Alarm

While the alarm is sounding, press any button
to stop it.
Crown
12