ABB REU 610 Technical Reference Manual page 92

REU 610
Table 5.1.17.-7 Control parameters
Description
Reading of the event buffer
Re-reading of the event buffer
Reading of relay state data
Resetting of relay state data
Time reading and setting
Date and time reading and setting
Type designation of the relay
Unlatching output contacts
Clearing indications and memorized values and
unlatching contacts (master reset)
Resetting of trip lockout
Rated frequency
Time setting range for demand values in
minutes
Non-volatile memory settings
Time setting for disabling new trip indications on
the LCD
Testing the self-supervision
LED test for start and trip indicators
LED test for programmable LEDs
Trip-circuit supervision
a)
Store counter
Nominal voltage
Remote control of setting group
Event mask for E31...E34
Event mask for 1E1...1E16
Event mask for 1E17...1E24
92
Voltage Relay
Technical Reference Manual
Control parameters
Parameter
L
B
C
C
T
D
F
V101
V102
V103
V104
V105
V106
V108
V109
V110
V111
V113
V114
V134
V150
V155
1V155
1V156
R, W, P Value
R Time, channel number and event code
R Time, channel number and event code
R 0 = Normal state
1 = The relay has been subject to an
automatic reset
2 = Overflow of the event buffer
3 = Both 1 and 2
W 0 = Reset E50 and E51
1 = Reset only E50
2 = Reset only E51
4 = Reset all events including E51 except for
E50
R, W SS.sss
R, W YY-MM-DD HH.MM;SS.sss
R REU 610
W 1 = Unlatch
W 1 = Clear and unlatch
W 1 = Reset
R, W (P) 50 or 60 Hz
R, W 0...999 min
R, W 0... 31
R, W (P) 0...999 min
W (P) 1 = Self-supervision output contact is
activated and the READY indicator LED
starts to blink
0 = Normal operation
R, W (P) 0 = Start and trip LEDs off
1 = Trip LED on, start LED off
2 = Start LED on, trip LED off
3 = Start and trip LEDs on
W (P) 0...255
R, W 0 = Not in use
1 = In use
R 0...65535
R, W (P) 0 = 100 V
1 = 110 V
2 = 115 V
3 = 120 V
R, W 0 = Setting group 1
1 = Setting group 2
R, W 0...63
R, W 0...65535
R, W 0...255
1MRS755769