ABB REU 610 Technical Reference Manual page 113

1MRS755769
Voltage Relay
Technical Reference Manual
Table 5.2.2.-3 Transmitter selection
Transmitter Position of jumper X6
Plastic X5.3-TX
Glass X5.4-TX
Table 5.2.2.-4 Receiver selection
Transmitter Position of jumper X2
Plastic X5.3-RX
Glass X5.4-RX
Fibre-optic Interface
X5.3
X5.4
X5.3
X5.4
Fig. 5.2.2.-2 Jumper location on the communication module for plastic and glass fibre
Table 5.2.2.-5 fibre-optic rear connectors (plastic and glass)
Terminal Function
X5.3-TX Transmitter for plastic fibre
X5.3-RX Receiver for plastic fibre
X5.4-TX Transmitter for glass fibre
X5.4-RX Receiver for plastic fibre
RS-485 connection for the DNP 3.0 communication module
If the relay is provided with the optional DNP 3.0 communication module, the cable
is connected to terminals X5.8/1-2 and X5.8/4-8. The connection socket is a 8-pin
header-type socket and the terminals are of screw compression type.
X5.3-TX(plastic)
X5.3-RX(plastic)
TX
X6
TX
RX
X2
RX
X6
X2
X5.4-TX(glass)
X5.4-RX(glass)
REU 610
A040335
113