ABB REU 610 Technical Reference Manual page 119

1MRS755769
Voltage Relay
Technical Reference Manual
Electromagnetic emission tests
Conducted, RF-emission (Mains terminal) EN 55011, class A, IEC 60255-25
*
Radiated RF-emission
*
CE approval
Table 5.2.3.-12 Standard tests
Insulation tests:
Dielectric tests
Test voltage
*
Impulse voltage test
Test voltage
*
Insulation resistance measurements
Isolation resistance
*
Mechanical tests:
Vibration tests (sinusoidal)
Shock and bump test
Table 5.2.3.-13 Data communication
Rear interface:
fibre-optic or RS-485 connection
*
SPA bus, IEC 60870-5-103, DNP 3.0 or Modbus protocol
*
9.6 or 4.8 kbps (additionally 2.4, 1.2 or 0.3 kbps for Modbus)
*
Front interface:
Optical connection (infrared): wirelessly or via the front communication cable
*
(1MRS050698)
SPA bus protocol
*
9.6 or 4.8 kbps (9.6 kbps with front communication cable)
*
60%/100 ms
60%/1000 ms
>95%/5000 ms
According to the EN 55011
EN 55011, class A, IEC 60255-25
Complies with the EMC directive 89/336/EEC
and the LV directive 73/23/EEC
According to IEC 60255-5
2 kV, 50 Hz, 1 min
According to IEC 60255-5
5 kV, unipolar impulses, waveform
1.2/50 μs, source energy 0.5 J
According to IEC 60255-5
>100 MΩ, 500 V DC
According to IEC 60255-21-1, class I
According to IEC 60255-21-2, class I
REU 610
119