ICP DAS USA I-7530 User Manual page 69

I-7530 series uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

"003456789". Therefore, Device1 can decide the target device which RS-232 commands will be

sent to. Also, Device1 knows where the RS-232 commands come from. The general concept of

transmitting data from Device1 to Device2 is shown below.

Note: In pair connection mode, all RS-232/RS-485/RS-422/USB commands listed in section 4

are useless. When the RS-232/RS-485/RS-422/USB or CAN buffer of CAN Converter is

overflow. The ERR Led will be turned on for 300ms, and then CAN Converter will be reset

by watchdog automatically.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A User Manual

Version 1.4

E-mail: service@icpdas.com

Page：

Table of Contents

I-7530a I-7530-ft I-7530t I-7565 Tm-7530 Tm-7530a