ICP DAS USA I-7530 User Manual page 44

I-7530 series uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

 Response: A valid command will let the module write the RS-232/RS-485/RS-422/USB

parameters into the EEPROM and then reboot the system.

Invalid command: ?<Error Code><CR>



Note:

It is necessary to enable the "Error Response" function in the CAN Converter Utility, in order to

receive Syntax and/or communication error information at the host PC.

I-7565 supports only one 921600 baud rate on the firmware version 2.X or before.

 Example:

Command: P00B30000<CR>

Set the RS-232/RS-485/RS-422/USB baud rate=115.2K, data bit=8, stop bit=1, none parity,

no checksum and No error responses into the CAN Converter module and then reboot the

CAN Converter module.

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A User Manual

460800 bps baud rate of RS-232, only for I-7565

921600 bps baud rate of RS-232, only for I-7565

Description

Version 1.4

E-mail: service@icpdas.com

Page：

Table of Contents

I-7530a I-7530-ft I-7530t I-7565 Tm-7530 Tm-7530a