ICP DAS USA I-7530 User Manual page 49

I-7565. The tM-7530 and tM-7530A is always support.
 Example:
Command: P3040000000000000000<CR>
Change the CAN baud rate=125K and acceptance code 0x00000000, acceptance mask
0x00000000 into the CAN Converter module. When CAN Converter module was rebooted,
the CAN parameter will be recovered to the previous setting.
I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved
Version 1.4
E-mail: service@icpdas.com
49
Page：