The I-7565 provides CAN and USB slave communication interfaces. On the USB interface, the
I-7565 provides the virtual COM driver. Users can use the I-7565 instead of the I-7530 if the
device only have USB host interface. The I-7565 is powered by the USB interface, it doesn't
need external power. The isolator of the I-7565 is on the CAN side.
Figure: The block diagram of the I-7565
15
I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A User Manual
Version 1.4
Page:
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved
E-mail: service@icpdas.com