ICP DAS USA I-7530 User Manual page 35

I-7530 series uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

* Note:

This command will write parameters into EEPROM and the

EEPROM is limited to 100,000 erase/write cycles.

Checksum algorithm:

The checksum [CHK] is 2-characters of the sum of the command message, from first character

to the character before <CR>. When calculate checksum, the value of [CHK] is zero.

For example:

Command: Reboot the CAN Converter module, "RA[CHK]<CR>".

1. Sum of the string = 'R' + 'A' = 52h + 41h = 93h.

2. Therefore the checksum is 93h and so [CHK]="93".

3. The command string with checksum ="RA93<CR>".

I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A User Manual

Version 1.4

Page：

E-mail: service@icpdas.com

Table of Contents

I-7530a I-7530-ft I-7530t I-7565 Tm-7530 Tm-7530a