Incubation - Zeiss LSM 880 User Manual

Inverted confocal microscope with airyscan

Hide thumbs Also See for LSM 880:

Table of Contents

1. Before you plan to use incubation please talk with Jeff, Agnes or Erica to help with setup

2. Make sure to turn on the incubation and CO2 controls before you open Zen (there is one

switch on the TempModuleS and one on the Heating Unit XL S)

Note: The TempModuleS light will turn on when you switch it on, the light on the

Heating Unit XLS will not turn on until the temperature is turned on in Zen

3. Under the Locate tab you will find the Incubation tab

4. Check the H Insert P if you would like to use the

heated insert, check the H Unit XL if you would

like to use the incubation chamber.

Note: Once you check the H Unit XL the bottom

light on the Heating Unit XL S will turn on and the

middle light will blink yellow telling you the

heating unit is warming up

Incubation

Table of Contents

Show Quick Links

Table of Contents