Module Labeling - GE VersaPoint IC220PBI002 User Manual

4

Module Labeling

You can identify the slots, terminal points, and connections using point labels and
module labels.
Various options are available for labeling slots and module points:
1 Each Terminal Strip can be labeled individually with point labels
(numbered labels: IC220ACC003 numbered 1-100, qty 10 sets, or
blank labels: IC220ACC004, qty 1000).
2 / 3 Another option is to use module labels. These are available in two
widths, to cover one Terminal Strip (IC220ACC001, qty.10) or four
Terminal Strips (IC220ACC002, qty. 10).
The Terminal Strip has a keyway for attaching a module label. A
small latch holds the module label in place.
4 / 5 Each signal can be labeled individually using point labels. On an
Extended Double Terminal Strip, the higher keyway (4) is designed
for labeling signals 1/2 and the lower keyway (5) is for signals 3/4.
(Numbered labels: IC220ACC003 numbered 1-100, qty 10 sets, or
blank labels: IC220ACC004, qty 1000).
4-24 VersaPoint™ I/O System Profibus-DP NIU User's Manual – August 2005 GFK-1911B