Status Leds And I/O Points; Gfk-1911B - GE VersaPoint IC220PBI002 User Manual

Status LEDs and I/O Points

The illustration below shows the relationship between the status LEDs on a
module and the module inputs or outputs.
In general, an I/O module's status LEDs appear over their associated
terminals. In cases where two I/O points are terminated in the same column
(for 4 and 16 point modules), the LED's relative position (top or bottom)
indicates the I/O point it is associated with.
For a single-width module with 4 inputs or outputs (middle module in the
illustration above), the LEDs and terminal points are associated as follows:
LED 1
LED 2
LED 3
LED 4
On the four-slot module, LED 2 on slot 4 is indicated. The LED belongs to
input 14 on terminal point 4/2.1 (slot 4 / terminal point 2.1)

GFK-1911B

Chapter 3 VersaPoint Modules
Terminal point 1.1
Terminal point 2.1
Terminal point 1.4
Terminal point 2.4
3
3-11