GE VersaPoint IC220PBI002 User Manual page 158

A
I/O Station Information
System Information
Number of devices per station
Sum of all I/O data per station
PROFIBUS-DP Interface
Maximum NIU current for supplying
the I/O module logic
Maximum additional current for
supplying the analog terminals
Maximum current consumption of
the I/O modules
Observe the logic current consumption of each device when configuring a
VersaPoint station! The logic current consumption is indicated in chapter
5 and in each module data sheet. The current consumption can differ
depending on the individual module. The permissible number of devices
that can be connected depends on the specific station structure.
Maximum current carrying capacity
of the voltage jumpers U
Maximum current carrying capacity
of the voltage jumpers U
current)
Observe the current consumption of every device on the individual voltage
jumpers when configuring a VersaPoint station! The logic current
consumption is given in chapter 5 and in each module data sheet. The
current consumption can differ depending on the individual module. If the
maximum current carrying capacity of a voltage jumper (8A) is reached, a
new power terminal must be used.
A-2 VersaPoint™ I/O System Profibus-DP NIU User's Manual – August 2005
63, maximum
184 bytes, maximum
Copper cable (RS-485), connected via D
sub shield connector; supply electrically
isolated, shielding directly connected with
functional earth ground.
2A at U
L
0.5A at U
ANA
See chapter 5 and the module datasheets
0.5A
ANA
8A
, U (total
M S
GFK-1911B