4
Replacing Power and Segment Terminal Fuses
For VersaPoint Power and Segment Terminal modules that have built-in fusing, if
a fuse is not present or defective, you must insert or exchange the fuse. Follow the
steps below to replace a fuse:
1. Lift the fuse lever (A).
2. Insert the screwdriver behind a metal contact of the fuse (B).
3. Carefully lift the metal contact of the fuse (C).
4. Carefully lift the fuse on one side and remove it by hand(D).
5. Insert a new fuse (E).
6. Push the fuse lever down again until it snaps into place with a click (F).
4-18
VersaPoint™ I/O System Profibus-DP NIU User's Manual – August 2005
GFK-1911B