Table of Contents
Advertisement
1
Important Information
1.3
Protective Devices
Warning!
!
There is a risk of injury if protective devices are missing or defective.
Replace all protective devices (covers, safety notices, grounding cables etc) after maintenance work
has been completed.
Replace parts that have become defective or unusable.
Wear protective goggles for:
•
Knocking pins or similar parts in or out with a hammer.
•
Using spring hooks.
•
Inserting or removing springs, retaining rings or grip rings.
•
Using solvents, cleansers or other chemicals.
1.4
Handling Electricity
The following work may only be done by trained and qualified electricians:
•
Work on electrical components.
•
Work on an open device still connected to the mains supply.
General precautions before starting maintenance work:
•
Find out where the emergency and power switches are so that they can be quickly thrown in an emergency.
•
Disconnect the current supply before carrying out the following work:
- Installing or removing power units.
- Working in the immediate vicinity of open power supply components.
- Mechanical check of power supply components.
- Modifying circuits in the device.
•
Test the zero potential of the device parts.
1.5
Procedure in Case of Accidents
•
Act calmly and with great care.
•
Avoid danger to yourself.
•
Switch off power.
•
Request medical assistance.
Give first aid, if necessary.
•
Notice!
i
The complete documentation is included in the scope of delivery on CD ROM, and can also currently be
found in the Internet.
5
Advertisement
Table of Contents
