Removing The Side Panel - HP ProLiant XL270d Gen9 Maintenance And Service Manual

Removing the side panel

Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server .
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
NOTE: To access GPU slots 1 to 4, remove the left side panel. To access GPU slots 5 to 8, remove
the right side panel.
6. Remove the side panel:
a. Loosen the six captive screws.
CAUTION:
To prevent damage to the server or components, do not rotate the side panel downward or
upward.
b. Using both hands, hold the four notches and remove the side panel in a horizontal motion.
Removing the side panel 33