HP ProLiant XL270d Gen9 Maintenance And Service Manual page 77

WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause
electrostatic discharge.
To remove the component:
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the air baffle.
8. Remove the drive cage assembly.
9. Disconnect any internal cables that are connected to the expansion board.
10. Remove the failed expansion board.
• Slot 9
• Slot 10
Removal and replacement procedures 77