Removing The Power Riser - HP ProLiant XL270d Gen9 Maintenance And Service Manual

3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the air baffle.
8. Remove the riser cross bracket:
a. Loosen the captive screws.
b. Remove the bracket from the server.

Removing the power riser

Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis.
5. Place the server on a sturdy, level surface.
6. Remove the access panel.
7. Remove the air baffle.
8. Remove the riser cross bracket.
9. Remove the power riser.
Removing the power riser 37