Installation - Yamaha SXV70ERG Supplementary Service Manual

AC MAGNETO

INSTALLATION

NOTE:
After installing all parts, refer to "CABLE ROUT-
ING" in CHAPTER 9, to check the cable, lead
and hose routings.
1. Install:
S Stator coil
S Pickup coil
NOTE:
S Pass the pickup coil lead 1 under the pickup
coil 2 as shown.
S Install the holder so that the side with notches
a faces outward.
2. Install:
S Woodruff key 1
CAUTION:
Be sure to remove any oil or grease from the
tapered portion of the crankshaft using a
cloth dampened with thinner.
NOTE:
Pass the magneto leads through the hole and
install the grommet in the crankcase.
3. Install:
S Magneto rotor
S Washer
S Nut (magneto rotor)
CAUTION:
Be sure to remove any oil or grease from the
tapered portion of the magneto rotor using a
cloth dampened with thinner.
NOTE:
When installing the magneto rotor, make sure
the woodruff key is properly seated in the key-
way of the crankshaft.
–94–
ENG