Yamaha SXV70ERG Supplementary Service Manual page 148

Parts be tightened Parts be tightened
Wheel bracket shaft and sliding frame
Set bolt (front axle)
Speed sensor
Gear unit (speed sensor)
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 120 Nm (12 mSkg, 85 ftSlb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 mSkg, 43 ftSlb).
TIGHTENING TORQUE
Tightening torque
Nm mSkg ftSlb
72 7.2 52
8 0.8 5.8
20 2.0 14
40 4.0 29
–142–
SPEC
Remarks Remarks

Apply LOCTITE