Yamaha SXV70ERG Supplementary Service Manual page 16

COOLING SYSTEM
5. Place an open container under the coolant
drain bolt 1 .
6. Remove:
S Coolant drain bolt
S Gasket (coolant drain bolt)
7. Drain the coolant.
NOTE:
Lift up the tail of the machine to drain the cool-
ant.
8. Remove:
S Seat
S Side cover 1
9. Disconnect:
S Coolant hoses 1
10. Drain the coolant.
NOTE:
Lift up the tail of the machine to drain the coolant
completely.
WARNING
Coolant is poisonous. It is harmful or fatal if
swallowed.
S If coolant is swallowed, induce vomiting
immediately and get immediate medical
attention.
S If coolant splashes in your eyes, thorough-
ly wash them with water and consult a doc-
tor.
S If coolant splashes on your skin or clothes,
quickly wash it away with soap and water.
11. Connect:
S Coolant hoses
12. Install:
S Side cover 1
Bolt (side cover):
3 Nm (0.3 mSkg, 2.2 ftSlb)
–10–
INSP
ADJ