Table of Contents
Advertisement
Settings
Manage Networks: Select Network in Settings, and press "OK"
key to enter.
Wired Setting:
■
cable to the network interface of the IFP set, and connect the other end to the router.
1. Select Ethernet Setting, and press "
2. If the router setting enables obtaining IP address automatically, select The
Automatic Acquisition IP Address, press "OK" key, and your
address automatically. If the router disables
can connect to the network in the following steps;
3. Select IPv6, and press "OK" key to enable/disable IPv6.
4. Select IP Address, and assign a valid IP address for the device;
5. Select Default Gateway, and assign a valid gateway for the device;
6. Select First DNS and Second DNS , and assign a valid DNS server address for
the device;
7. Select Save, press "OK" key, and the system prompts setup is successful.
Wireless setting
■
1. Select Wireless, and press "▶" key;
2. Select Wi-Fi, and press "OK" key to enable wireless network. If the scanned
network has the
network has the
3. Select a network in the list, and press "OK" key;
4. Select password, type the password in the input box, select connect, and press
"OK" key;
5. If the router setting enables obtaining IP address automatically, select The
Automatic Acquisition IP Address, press "OK" key, and your TV will obtain the IP
address
automatically. If the router disables
can
connect to the network in the following steps;
6. Select IP Address, and assign a valid IP address for the device;
7. Select Subnet Mask, and assign a valid subnet mask for the device;
8. Select Default Gateway, and assign a valid gateway for the device;
9. Select First DNS and Second DNS , and assign a valid DNS server address for
the device;
10. Select Save, press "OK" key, and the system prompts setup is successful.
Backup/Update:
Update. You will be notified if there's new image available.
Remark: Before resetting, please back up your personal data, which will be lost
after reset.
About:
View the Models, System Version, Memory Information.
Before using wired network, connect one end of the network
OK
icon, it
doesn't require password to connect; if the scanned
icon, you need to enter the valid password to access the network;
Update the device through Settings > Backup / Update > System
" key to enter;
obtaining IP address automatically, you
obtaining IP address automatically, you
Android system interface
IFP
will obtain the IP
35
Advertisement
Table of Contents
