Connection; Connecting Audio/Video Signals - BenQ RP790 User Manual

Hide thumbs Also See for RP790:

Table of Contents

Connection

Pay attention to the following notes when you connect cables:

• Please turn off all devices.

• Familiarize yourself with the audio/video ports on the display and the devices you want

to use. Be aware that incorrect connections may adversely affect picture quality.

• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the

connectors at the end of the cable.

• Ensure that all cables are fully inserted and frmly seated.

Connecting the VGA input

1. Connect the VGA jack on the display to the VGA output jack on a computer using a

D-Sub (15-pin) cable.

2. Connect the computer's audio output jack to the AUDIO jack on the display using a

suitable audio cable.

3. To view images from this input, press the input button on the remote control and

select VGA .

The audio cable is not supplied and should be purchased separately.

VGA (15-pin) cable

Computer

Audio cable

Connection

Table of Contents