Picture Menu - BenQ RP790 User Manual

The OSD (On-Screen Display) menu
28

Picture menu

Name
Sets the display mode. Available modes are Standard, User,
Classroom, Properties such as Contrast,
and
Picture Mode
NOTE: In the picture mode, the end user can find there is mode which
is called classroom mode. Under classroom mode, the low blue light
will be activated.
Adjust the layerings of images: increase the analog value to improve
Contrast
the contrast and decrease the analog value to reduce the contrast (0-100).
Adjust the brightness of images: increase the analog value to improve
Brightness
the brightness and decrease the analog value to reduce the brightness (0-100).
Adjust the hue of images: increase analog value to increases green and
Hue
decrease analog value to increases purple(0-100).
Adjust the sharpness of images: increase the analog value to increases the
Sharpness
definition and decrease the analog value to reduce the definition (0-100).
Adjust the color depth of images: increase the analog value to improve the
Saturation
depth and decrease the analog value to reduce the depth (0-100).
Color
Adjust the color temperature of images: Standard, Warm, Cold.
Temperature
Adjust the zoom mode:
Zoom Mode
Zoom mode supported by each input:HDMI: PC Mode, Full, 4:3, Film, Subtitle.
VGA: Full, 4:3
Image Noise
Set the grade of noise reduction: Middle, High, Off, Low.
Reduction
Adjust the screen aspect ratio in PC mode, which is valid in VGA signal source.
PC Image
Sets PC image mode to Auto Tune, or manually fine-tunes Clock, Phase,
Mode
Horizontal Position, and Vertical Position.
Image Noise Reduction
PC Image Mode
Saturation can be adjusted if the mode is set to User.
Standard
Middle
Description
Brightness, Hue , Sharpness
Bright ,