Display; Using The Keypad; On/Off Key; Navigation Keys - Emerson Fisher FIELDVUE DVC2000 Instruction Manual

DVC2000 Digital Valve Controller
BLINKING HEART
INDICATES
COMMUNICATION
WITH A FIELDVUE
INSTRUMENT
IrDA INTERFACE
(TOP)
TOUCH SCREEN
DVC2000: Tag

DISPLAY

1
2 Travel
3 Valve SP
4 Drive Sgl
5 Pressures

NAVIGATION KEYS

(FOUR ARROW KEYS)

TAB KEY

ON/OFF KEY

MULTIFUNCTION LED
W8845
Figure B-1. 375 Field Communicator
Note
B
The 375 Field Communicator
device description revision (DD)
determines how the Field
Communicator interfaces with the
instrument. For information on
displaying the device description
revision, see page B-6.
This section discusses the display, keypad, and menu
structure for the Field Communicator, shown in figure
B-1. It includes information for displaying the Field
Communicator device description revision number. For
information on connecting the Field Communicator to
the instrument, see the Installation section, Section 2.
For more information on the Field Communicator,
such as specifications and servicing, see the User's
Manual for the Field Communicator 00375-0047-0001,
included with the Field Communicator. This manual
also is available from Rosemount Inc., Measurement
Division.
B-2
HOT
HART AND fieldbus
KEY
COMMUNICATION
TERMINALS (TOP)
SCRATCH
PAD
STYLUS
(BACK)
Setup & Diag OPTIONAL
53.69% EXPANSION
52.6%
PORT (SIDE)
58.15%

ENTER KEY

FUNCTION KEY
ALPHANUMERIC
KEYS
POWER SUPPLY
CHARGER
CONNECTION (SIDE)
BACKLIGHT
ADJUSTMENT
KEY
Display
The Field Communicator communicates information to
you through a 1/4 VGA (240 by 320 pixels)
monochrome touch screen. It has a viewing area of
approximately 9 cm by 12 cm.

Using the Keypad

On/Off Key
The on/off key is used to turn the Field Communicator
on and off.
From the Main Menu, select HART Application to run
the HART application. On startup, the HART
Application automatically polls for devices.
If a HART-compatible device is found, the Field
Communicator displays the Online menu. For more
information on Online and Offline operation, see Menu
Structure in this section.
The on/off key is disabled while any applications are
open, making it necessary for you to exit the 375 Main
Menu before using the on/off key. This feature helps to
avoid situations where the Field Communicator could
be unintentionally turned off while a device's output is
fixed or when configuration data has not been sent to
a device.
Navigation Keys
Four arrow navigation keys allow you to move through
the menu structure of the application. Press the right
arrow ( ) navigation key to navigate further into the
menu.
Enter Key
The enter key allows you to perform the highlighted
item, or to complete an editing action. For example, if
you highlight the Cancel button, and then push the
enter key, you will cancel out of that particular window.
The enter key does not navigate you through the
menu structure.
Tab Key
The tab key allows you to move between selectable
controls.

Alphanumeric Keys

Figure B-2 shows the alphanumeric keypad. Data
entry, and other options, using letters, number and
July 2009