Tools Required For Slide Assembly - S.R.Smith Rogue 2 Assembly And Installation Instructions Manual

SLIDE DECK ANCHOR FLANGE KIT PARTS
1 75-209-5000
2 05-162
3 05-14-123
4 04-14-111
5 05-14-117
6 01-500
7 5-306
* Ref #s are shown as (#__ ) in these
Figure 2

TOOLS REQUIRED FOR SLIDE ASSEMBLY:


PVC glue

7/32" Allen Wrench

Electric Drill, Phillips Drive, ½ Hex Socket Drive

Ratchet with 7/16", 1/2" and 3/8" sockets

7/16", 1/2" and 9/16" wrench

Hammer drill with 1/4" (6 mm) masonry bit

Small Level

Tape

9/16" Deep Socket

3/8" (9.5 mm) Drill Bit

¼" (6 mm) Drill bit

Pencil or marker

Loctite® 242 Thread Locking Compound
SLIDE DECK ANCHOR FLANGE KIT
(75-209-5866)
Aluminum Flange Anchor
5/16 -18 UNC x 2 3/4 STUD w/ FLAT
WASHER & LOCK NUT
1/4-20 UNC x 2 3/4 HHCS
1/4"ID x 5/8"OD FLAT WASHER
1/4-20 UNC HEX NYLON LOCK NUT
3/8" O.D. ALUMINUM BUSHING
3/8" O.D. Aluminum Bushing
ASSEMBLY AND INSTALLATION INSTRUCTIONS
(SOLD SEPERATELY)
5
4 ea.
16 ea.
4 ea.
8 ea.
4 ea.
4 ea.
16 ea.