Table of Contents
Advertisement
SLI D E A S SEMB LY INS TRUC TIO NS
Prior to starting assembly, check and make sure that all components listed
on the parts list on page 9 were included in the package.
Assembly Steps
1. Place the provided trolley under the bottom step of the ladder as
shown in Figure 3.
2. Once trolley is in place, use your foot to ensure that the trolley is
firmly positioned in place (see Figure 4).
3. Using both hands, as shown in Figure 5, grab the ladder handles and
slowly begin leaning the SlideAway towards you to transfer the weight
of the slide onto the trolley wheels, enabling you to roll the slide to
the desired location.
4. Once you have rolled the SlideAway into the desired location, place
your foot back onto the base of the trolley to secure it and carefully
lean the SlideAway back up until it is free-standing again.
5. Remove the trolley and store it away until you are ready to move
your SlideAway off of the pool deck.
6. To insert brace, slightly lean SlideAway to one side using the ladder
handles as shown in Figure 6. Slide the brace under the slide and lock
firmly into place (Figure 7).
Figure 5
10
Figure 6
Figure 3
Figure 4
Figure 7
Advertisement
Table of Contents
