Table of Contents
Advertisement
Figure 14
Garden Hose Adapter Installation Instructions
If connecting the Rogue2 water system to the pool plumbing system is not an option you may connect
the water system to a garden hose by following the steps outlined below.
A.) Make sure that the Rogue2 water system
has been properly assembled as explained in
the Rogue2 Installation Instructions. Next, apply
PVC glue around the end of the garden hose
adapter indicated by the arrow in Figure 15.
B.) After the glue is applied quickly insert the PVC
fitting into one end of PVC ball valve as shown in Figure
16.
C.) The final step is to thread a garden hose into the
PVC garden hose adapter
27) After connecting the water source to the ball valve, turn on water slowly to check for leaks.
MANUFACTURER'S PLACEMENT INSTRUCTIONS
1) The critical dimensions for placement of the slide are as shown in Figures 17 and 18.
.
16
Flex Hose
4
1
Figure 15
Figure 16
Advertisement
Table of Contents
