Periodic Maintenance - Canon imageRUNNER ADVANCE 6575i Service Manual

Canon
P.

Periodic Maintenance

Some parts of the machine must be checked and/or replaced on a periodic
basis to ensure a specific level of machine performance. These parts are
likely to affect the performance once they fail even in the absence of external
change or damage. Whenever possible, plan their replacement so that it will
coincide with a scheduled service visit.
Note: All periodic maintenance shown in the below table is for reference
purposes only and are subject to change without notice. Refer to the Service
Manual for additional information.
Table 27 – Periodic Maintenance Items
Part Name
Dustproof Glass
Grid Wire
Primary Charging
Assembly Shield Plate
Pre-transfer Charging
Assembly Shield Plate
Drum Cleaning Unit
Plate
Pre-exposure Plastic
Sheet
Toner collection area
Separation Claw
Mounting Base
Process Unit Rear
Guide
Drum Sliding Assembly
48 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier.
Data is subject to change depending upon many factors including, without limitation, monthly copy
volume, environment, type of image printed and customer handling of the equipment.
Canon imageRUNNER ADVANCE 6575i/6565i/6555i Service Guide
Revision1
Canon imageRUNNER ADVANCE 6575i/6565i/6555i Service Guide
Main Unit Periodic Maintenance
Estimated Interval
250,000 300,000 500,000
Δ: Cleaning ×: Lubrication
△
△
△
△
△
△
△
48
1,000,000 As needed
△
Clean with lint-free paper
moistened with alcohol.
Clean when Primary
Charging Wire is replaced.
Clean with lint-free paper
moistened with alcohol.
In a high temperature/
humidity environment (30
deg C/80%), the interval is
250,000 sheets.
△
Clean with lint-free paper
moistened with alcohol.
Crumb toner clusters.
In a high temperature/
humidity environment (30
deg C/80%), he interval is
250,000 sheets.
Clean with lint-free paper
moistened with alcohol.
△×
Apply lubricant at the Drum
Sliding Assembly when ab-
normal sound is heard at the
time of operation
(FY9-6008).
Remarks
February 2016
Page 60