Electromagnetic Compatibility - Siemens SIMATIC ET 200SP User Manual

Use in industrial environments
SIMATIC products are designed for use in industry.
Table 10- 1
Area of applica-
tion
Industry
Use in residential areas
Note
The ET 200SP is intended for use in industrial areas; use in residential areas may have an
impact on radio/TV reception.
If you want to use the ET 200SP in residential areas, you must ensure that its radio
frequency interference emission complies with limit class B in accordance with EN 55011.
Suitable measures for achieving RF interference level Class B include, for example:
● Installation of the CPU 1515SP PC (F). in grounded control/switch cabinets
● Use of filters in the supply lines
Reference
The certificates for the markings and approvals can be found on the Internet under
Service&Support (http://www.siemens.com/automation/service&support).
10.2

Electromagnetic compatibility

Definition
Electromagnetic compatibility (EMC) is the ability of an electrical installation to function
satisfactorily in its electromagnetic environment without interfering with that environment.
Among other things, CPU 1515SP PC (F) also meets the requirements of the EMC
legislation for the European single market. The prerequisite for this is that the
CPU 1515SP PC (F) complies with the requirements and guidelines relating to electrical
equipment.
EMC according to NE 21
The CPU 1515SP PC does not meet the EMC specifications of the NAMUR guideline NE21.
The CPU 1515SP PC meets the EMC specifications according to IEC 61131-2 and
IEC 61000-6-2.
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
Use in industrial environments
Interference emission requirements
EN 61000-6-4: 2011
10.2 Electromagnetic compatibility
Interference immunity requirements
EN 61000-6-2: 2005
Technical data
105