Installing Cpu 1515Sp Pc (F) - Siemens SIMATIC ET 200SP User Manual

Installing

4.3 Installing CPU 1515SP PC (F)

4.3 Installing CPU 1515SP PC (F)
Requirements
The mounting rail is fitted.
Required tools
3 to 3.5 mm screwdriver (only to fix the strain relief and dismantle the BusAdapter)
Fixing strain relief
Fasten the strain relief at the upper and lower left side of the CPU 1515SP PC (F) with the
supplied screws.
Installing CPU 1515SP PC (F)
1. Install the CPU on the mounting rail.
2. Swivel the CPU back until you hear the mounting rail release click into place
3. To check that the CPU has correctly clicked into place, pull on the underside of the
enclosure.
Figure 4-2
38
Installing CPU 1515SP PC (F)
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC