Prismasync Software Options; E-Shredding-D1; Docbox-E1 - Canon imagePRESS C800 Service Manual

Canon
B.

PRISMAsync Software Options

Software options available for the imagePRESS C800/C700 with the
PRISMAsync Controller Attached

1. E-shredding-D1

•
Allows the end-user to securely erase jobs from the imagePRESS
C800/C700 Series and the PRISMAsync controller to prevent
unauthorized access to deleted jobs
•
This functionality provides a layer of data security for government
agencies and corporate enterprises with an increased demand for
data security
•
Available erase options are:
• Gutmann - All jobs on the imagePRESS C800/C700Series and
• US DOD 5220.22m, 8-306.d - All jobs on the imagePRESS
• Custom - The end-user can define the number of overwrite
Note: Depending on the e-shredding settings (number of overwrites) and
the complexity of the processed job data e-shredding will impact product
performance. An impact of 10% to 40% can be expected on product
performance.

2. DocBox-E1

•
Provides operators with a comprehensive means to store, group, edit
and reprint jobs. The editing options are a subset of the
PRISMAprepare job preparation software.
•
Multiple DocBoxes can be set up (each with a unique name) and can
be secures with a PIN.
•
A DocBox can contain several Jobs (print jobs and scan jobs). Jobs
can be edited and stored within the DocBox
•
Basic features of the DocBox functionalities:
•
•
•
•
Canon imagePRESS C800/C700 Service Guide
Revision 2
the PRISMAsync controller are erased in 35 overwrite passes.
C800/C700 Series and the PRISMAsync controller are erased in
three (3) overwrite passes.
passes manually.
Carry out advanced job preparation actions.
Correct settings when the proof print is not correct, for example
change the print quality or layout of a document.
Combine analogue documents with digital documents.
Store jobs that must be reprinted regularly (examples: reports or
books).
Canon imagePRESS C800/C700 Service Guide
October 2014
Page 17