Canon imagePRESS C800 Service Manual page 33

Canon
f) HDD Data Encryption & Mirroring Kit-C8
•
•
•
•
Installing the HDD Data Encryption & Mirroring Kit (after the machine
is installed and operational), requires the machine's system software
to be updated. This reformats the entire hard drive, and all data
previously stored on the hard disk drive is deleted. Accordingly, it is
strongly recommended that all of the data stored on the hard disk
drive of the machine be backed up prior to installing the HDD Data
Encryption & Mirroring Kit.
g) 3.5 inch/1 TB HDD-M1
•
•
•
h) Encrypted Secure Print Software-D1
•
•
•
i) Removable Hard Disk Drive Kit-B1
•
•
Canon imagePRESS C800/C700 Service Guide
Revision 2
Includes both encryption and mirroring capabilities.
Encrypts all image data and device settings before storing them
on the hard drive.
The mirroring function provides redundancy when used with an
additional hard disk drive of the same storage capacity.
Requires the optional 3.5 inch/1 TB HDD for the mirroring
capability.
IMPORTANT
Required for the HDD Mirroring function when the HDD Data
Encryption & Mirroring Kit is installed.
Does not increase the overall storage capacity of the machine.
If the machine is configured with the optional HDD Data
Encryption & Mirroring Kit, an additional 3.5 inch/1 TB HDD
must be added to enable the Mirroring capability of the primary
drive.
Enables the user to encrypt print data sent from a computer by
using the Secured Print function, and then decrypt it at the
device.
imagePRESS Printer Kit-D1 must be installed
Requires license activation via the LMS
Enables the hard disk of the imagePRESS Server F200 to be
removed for storage while the controller is unattended or not in
use.
Provides a layer a data security for government agencies and
corporate enterprises who need to ensure that the data stored
on the Hard disk is physically secured when the controller is not
in use.
Canon imagePRESS C800/C700 Service Guide
October 2014
Page 27