Canon imagePRESS C800 Service Manual page 119

Canon
Table 68 – Puncher Unit-BS1 / Puncher Unit-BT1 Specifications
Item
Paper Size
Paper Weight
58
Paper Type
Punch Hole Quantity,
Hole Diameter
Distance Between Punch
Holes
Paper Size in Which Holes
Can be Punched
Puncher Waste Tray
Capacity
Power Source
Dimensions (H x W x D)
Weight
58 Reference Registered Paper Types and Weight for the available paper weights.
Canon imagePRESS C800/C700 Service Guide
Revision 2
Puncher Unit-BS1 / Puncher Unit-BT1
Size:
Puncher Unit-BS1:
Two Holes:
LGL, LTRR, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182
mm x 182 mm to 297 mm x 432 mm))
Three Holes:
11" x 17", LTR, EXEC, and Custom Size (9 1/2" x 7 1/8" to 11 3/4"
x 17" (240 mm x 182 mm to 297 mm x 432 mm))
Puncher Unit-BT1:
Two Holes:
LGL, LTRR, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182
mm x 182 mm to 297 mm x 432 mm))
Four Holes:
11" x 17", LTR, EXEC, and Custom Size (10 1/8" x 7 1/8" to 11 3/4"
x 17" (257mm x 182 mm to 297 mm x 432 mm))
14 lb bond to 110 lb cover (52 g/m
Note: The maximum weight for coated paper is 110 lb index (209 g/m
Thin 2, Thin 1, Plain 1, Plain 2, Heavy 1, Heavy 2, Heavy 3, Heavy 4, Heavy 5,
Heavy 6, Color, Recycled, Tab, Bond, Letterhead, Coated, and Textured
Puncher Unit-BS1
Two or Three Holes: 3/8" (8 mm)
Puncher Unit-BT1
Two or Four Holes: 1/4" (6.5 mm)
Puncher Unit-BS1
Two Holes: 2 3/4" (70 mm)
Three Holes: 4 1/4" (108 mm)
Puncher Unit-BT1
Two Holes: 3 1/8" (80 mm)
Four Holes: 3 1/8" (80 mm)
Two Holes: LGL, LTRR
Three Holes: 11" x 17", LTR, EXEC
Approximately 6,000 sheets (20 lb bond (80 g/m
Note: The figure may differ depending on the surrounding environment, paper type,
and paper weight.
From the Finisher
Inside the Finisher
Approximately 6.7 lb (3.0 kg)
Canon imagePRESS C800/C700 Service Guide
Specification
2 2
to 300 g/m )
2
))
2
).
October 2014
Page 113