Canon imagePRESS C800 Service Manual page 51

Canon
•
Floor Structure:
The floor on which this machine will be installed must have a floor load of
at least 61.5 lb/ft
floor load, the machine can be installed near a pillar or beam. Consult
with your building contractor before installing the machine.
The weight of the machine will be primarily focused on the floor through
the adjuster and wheels. We recommend the use of a floor plate to
distribute the weight.
We also recommend the use of a floor plate when installing the machine
on carpet or wood flooring. For information about floor plates, contact
your dealer.
Do not install the machine on an unstable floor or platform.
•
Minimum corridor width to navigate turns for the main unit and most
accessories is 85.5" (2,170 mm). When the booklet trimmer is attached
the minimum corridor width to navigate turns is 88.75" (2,254 mm).
•
The machine should not be moved once it is in place.
•
Do not place anything around the machine. Especially, do not place
anything around the breaker, as doing so may prevent access to the
breaker in an emergency, possibly resulting in personal injury.
Table 23 – Installation Space
Canon imagePRESS C800/C700 Service Guide
Revision 2
2 2
(300 kg/m ). Even if the floor does not have this level of
Output Tray-A1, Duplex Color Image Reader Unit-H1,
and Upright Control Panel-D1 are attached
Canon imagePRESS C800/C700 Service Guide
October 2014
Page 45