Two-Knife Booklet Trimmer-A1; Document Insertion Unit-M1; Perfect Binder-D1; Puncher Unit-Bs1 - Canon imagePRESS C800 Service Manual

Canon
I.

Two-Knife Booklet Trimmer-A1

•
Connects to the Booklet Trimmer-D1.
•
Trims the top and bottom side of saddle stitched booklets.
•
Adjustable trimming is available
•
Trims up to 25-sheets (approximately 100 pages).
•
The Conveyor Tray can hold approximately 30 booklets (uses the
Conveyor Tray of the Booklet Trimmer-D1).
•
Requires the Booklet Trimmer-D1.
J.

Document Insertion Unit-M1

•
Inserts pre-printed cover sheets or insertion sheets for binding.
•
The upper tray and a lower tray have a capacity of up to 200 sheets each
(@ 20 lb bond (80 g/m
•
Supports 14 lb bond to 110 lb Cover (52 g/m
•
Supports paper sizes up to 13" x 19"
K.

Perfect Binder-D1

•
Provides the ability to create perfect bound books in-line.
•
Provides high quality document binding for up to 200 sheets with a cover
sheet that can be fed through an Insertion Unit.
•
The Perfect Binder utilizes hot glue technology, and 3-side trimming for a
high-quality finished product.
•
The upper tray and lower tray have a capacity of up to 200 sheets each.
•
Requires the Finisher-AM1 or Saddle Finisher-AM2.
L.

Puncher Unit-BS1

•
Provides 2-hole and 3-hole punch capabilities for either the Finisher-AM1
or Saddle Finisher-AM2
•
Supports 2-hole punch for LGL and LTRR paper and 3-hole punch for 11"
x 17" and LTR
•
Supports paper weights from 16 lb bond to 74 lb cover (60 to 200 g/m
M.

Puncher Unit-BT1

•
Provides 2-hole and 4-hole punch capabilities for either the Finisher-AM1
or Saddle Finisher-AM2
•
Supports 2-hole punch for sheet sizes 7.2" x 7.2" to 11.7" x 17" and 4-
hole punch for sheet sizes 10.1" x 7.2" to 11.7" x 17"
•
Supports paper weights from 14 lb bond to 110 lb cover (52 to 300 g/m
Canon imagePRESS C800/C700 Service Guide
Revision 2
Canon imagePRESS C800/C700 Service Guide
2
)).
2 2
to 300 g/m )
October 2014
2
)
2
)
Page 12