Mute - Canon WX6000 User Commands

MUTE

Mute control
Format
MUTE=<Mute control parameter: ID>
GET□MUTE / ?△MUTE
<Mute control parameter: ID>
ON
OFF
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or ' ', current mute setting is returned as
GET MUTE ?MUTE
'g:MUTE=<Mute control parameter: ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the sound output muting to ON or OFF.
(2) Mute control enables simultaneous control of the audio and beep sound.
(3) This command is identical to pressing the MUTE button on the remote control.
(4) The mute setting is always "OFF" when the power has just been turned on.
(5) The volume can be set even when it is on "MUTE".
(6) The current muting status can be acquired using the applicable GET command. ("
Example
Setting
> MUTE=ON
< i:OK
Reference
> GET MUTE or ?MUTE
< g:MUTE=ON
* Commands are indicated by ">", and responses are indicated by "<".
Disables the audio / beep sound.
Enables the audio / beep sound.
Input
A-RGB COMP HDMI None
-
This mutes the volume.
This retrieves the volume state.
- 58 -
WX6000 / SX6000 User Commands
")
GET MUTE