6Axadj - Canon WX6000 User Commands

6AXADJ

6-axis adjustment ON / OFF
Format
6AXADJ=<6-axis adjustment parameter
GET□6AXADJ / ?△6AXADJ
<6-axis adjustment parameter:ID>
ON
OFF
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET 6AXADJ ?6AXADJ
'
g:6AXADJ=<6-axis adjustment parameter
For details on other responses, refer to the "Error List".
Description
(1) This command is used to select ON or OFF for the 6-axis adjustment.
(2) This command functions in the same way as when "Image adjustments" - "Advanced
adjustments" - "6-axis adjustment" are selected on the menu.
(3) In the case of "6-axis adjustment," set the hue and color saturation of each axis using the
6AXR to Y "6-axis correction R to Y hue / color saturation setting" commands.
(4) This sets the currently selected input signal and image mode.
(5) The current 6-axis adjustment setting can be obtained using the GET command. ("
"）
6AXADJ
Example
Control
> 6AXADJ=ON
< i:OK
Reference
> GET 6AXADJ or ?6AXADJ
< g:6AXADJ=ON
*Commands are indicated by ">", and responses are indicated by "<".
:
ID>
This sets the 6-axis adjustment to ON.
This sets the 6-axis adjustment to OFF.
Input
A-RGB COMP HDMI None
-
', current 6-axis adjustment state is returned in
:
ID>
The 6-axis adjustment is set to ON.
The 6-axis adjustment ON or OFF setting is obtained.
- 14 -
WX6000 / SX6000 User Commands
'
GET