Details Of Commands - Canon WX6000 User Commands

6. Details of Commands

Descriptions of each command are provided starting from the next page.
The command descriptions have the format shown below.
Alphabetic command name
This briefly describes the command function.
Format
This indicates the command format.
Environment
This defines the environments that support the command (power supply state, input signal state).
Power*1
OFF ON PM
*2 *3
*1 Power
*2 OFF
*3 ON
*4 PM
*5 Input
Response
This describes the command response.
Description
This includes the command function, conditions, and notes.
Example
This provides command usage examples.
Input
D-RGB A-RGB COMP
*4 *5 *5 *5
Executable regardless of power supply state when marked by "-".
"O" if enabled in a power OFF state.
"O" if enabled in a power ON state.
"O" if enabled while the power management state is in standby state.
The command is enabled in states marked by "O".
The command is executable regardless of input when marked by "-".
WX6000 / SX6000 User Commands
HDMI None
*5 *5
- 13 -