Canon WX6000 User Commands page 62

NR
Noise reduction
Format
NR=<Noise reduction setting parameter:ID>
GET□NR / ?△NR
<Noise reduction setting parameter:ID>
OFF
WEAK
MIDDLE
STRONG
Environment
Power
OFF ON PM D-RGB
X O X X
Response
"i:OK" is returned if noise reduction was set properly.
For ' ' or ' ', current noise reduction setting is returned as
GET NR ?NR
'g:NR=<Noise reduction setting paarameter:ID>'
"FUNCTION_NOT_AVAILABLE" is returned if PC is selected for HDMI input.
For details on other responses, refer to the "Error List".
Description
(1) This sets the noise reduction function.
(2) This command functions in the same way as when "Image adjustment" - "Advanced
adjustment" - "Noise reduction" are selected on the menu.
(3) This sets the currently selected input signal and image mode.
(4) The current noise reduction function status can be acquired using the applicable GET
command ("
GET NR
Example
Setting
> NR=MIDDLE
< i:OK
Reference
> GET NR or ?NR
< g:NR=MIDDLE
* Commands are indicated by ">", and responses are indicated by "<".
Off
Weak
Middle
Strong
Input
A-RGB COMP HDMI None
X O O
").
This sets the noise reduction function to MIDDLE.
This retrieves the noise reduction function status.
- 59 -
WX6000 / SX6000 User Commands
O