Mute - Canon WUX500ST User Commands

MUTE

Mute control
Format
Setting Command
Response
Reference Command
Response
< Mute control parameter:ID>
Parameter
ON
OFF
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB
No No No No Yes No No No No Yes No No Yes
Remarks
(1) Mute setting is always set to "OFF" after the projector is turned on.
(2) Audio mute is canceled if audio volume is adjusted when audio mute is enabled.
Example
(Setting)
>MUTE=ON
< i:OK
(Reference)
> GET=MUTE
< g:MUTE=ON
Note: '>' indicates a command; '<' indicates a response.
MUTE=<Mute control parameter:ID>
i:OK
GET=MUTE
g:MUTE=<Mute control parameter:ID>
Note: See "Error list" for any response other than the above.
Meaning
Disables the audio/beep sound.
Enables the audio/beep sound.
WiFi RS-232C
Yes
-68-
WUX500ST User Commands
Input
Yes Yes Yes Yes Yes Yes
No
signal Yes