Krep - Canon WX6000 User Commands

KREP

Key repeat
Format
KREP=<Key repeat parameter: ID>
GET□KREP / ?△KREP
<Key repeat parameter: ID>
OFF
ON
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned when Key repeat parameter was completed successfully.
For ' ' or ' ', current Key repeat setting is returned as
GET KREP ?KREP
' g:KREP=<Key repeat parameter: ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set Key repeat.
(2) This command functions in the same way as when "System setting" - "Other setting" - Key
repeat" are selected on the menu.
(3) The current Key repeat setting can be obtained using the GET command. ("GET KREP")
(4) Key repeat setting retains the last setting after the power is turned off.
Example
Setting
>
KREP=OFF
<
i:OK
Reference
>
GET KREP or ?KREP
<
g:KREP=OFF
*Commands are indicated by ">", and responses are indicated by "<".
Turned off
Turned on
Input
A-RGB COMP HDMI None
-
Key repeat setting is disabled.
Key repeat setting is acquired.
- 51 -
WX6000 / SX6000 User Commands