Cont - Canon WX6000 User Commands

CONT

Contrast setting
Format
CONT=<Contrast setting:Number>
GET□CONT / ?△CONT
Setting values for <Contrast setting:Number> are -20 to 20.
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or ' ', current contrast setting is returned as
GET CONT ?CONT
'
g:CONT=<Contrast setting:Number>
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen contrast.
(2) This command functions in the same way as when "Image adjustment" - "Contrast setting"
are selected on the menu.
(3) If numerical parameters are outside the range, "
(4) This sets the currently selected input signal and image mode.
(5) The current contrast can be acquired using the applicable GET command. ("
Example
Setting
> CONT=3
< i:OK
Reference
> GET CONT or ?CONT
< g:CONT=3
* Commands are indicated by ">", and responses are indicated by "<".
Input
A-RGB COMP HDMI None
-
'
This sets the contrast to +3.
This retrieves the contrast.
- 33 -
WX6000 / SX6000 User Commands
" is returned.
e:0801 INVALID_VALUE
")
GET CONT