Mems; Mute - Canon WUX450 User Commands

MEMS

Memory color adjustment (sky)
Format
Setting Command
Response
Reference Command
Response
< Memory color adjustment parameter:ID >
Parameter
OFF
WEAK
MIDDLE
STRONG
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) This setting applies to the currently selected input signals and the image mode.

MUTE

Mute control
Format
Setting Command
Response
Reference Command
Response
< Mute control parameter: ID >
Parameter
ON
OFF
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) Mute setting is always set to "OFF" after the projector is turned on.
Mute setting is canceled if audio volume is adjusted during mute.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
MEMS=<Memory color adjustment parameter:ID>
i:OK
GET=MEMS
g:MEMS=<Memory color adjustment parameter:ID>
Note: See "Error list" for any response other than the above.
Meaning
Turns off
Weak
Middle
Strong
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
MUTE=<Mute control parameter: ID>
i:OK
GET=MUTE
g:MUTE=<Mute control parameter: ID>
Note: See "Error list" for any response other than the above.
Meaning
Disables the audio / beep sound.
Enables the audio / beep sound.
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 44 -
Input
HDMI LAN USB
Yes Yes Yes Yes
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes
None
Yes