Saveimgprof - Canon WX6000 User Commands

SAVEIMGPROF

Create, save, delete user memory / Create user memory status
Format
SAVEIMGPROF=<User memory save to parameter:ID>
<User memory save to parameter:ID>
USER_1
USER_2
USER_3
USER_4
USER_5
DEL_ALL
<User memory presence parameter:ID>
0
1
Environment
Power
OFF ON PM D-RGB
X O X O
Response
"i:OK" is returned if the user memory was saved properly.
For ' ' or '
GET SAVEIMGPROF
'g:SAVEIMGPROF=<Number of user memories>:<User 1 present parameter>,
For details on other responses, refer to the "Error List".
Description
(1) This command is used to create user memory.
(2) This command functions in the same way as "Image adjustment" - "Create user memory " and
"Save user memory".
(3) The create user memory status can be confirmed using the GET SAVEIMGPROF command
("
GET SAVEIMGPROF
Example
Setting
> SAVEIMGPROF=USER_2
< i:OK
Reference
> GET SAVEIMGPROF
< g:SAVEIMGPROF=5:0,1,1,0,0
* Commands are indicated by ">", and responses are indicated by "<".
Save to User 1
Save to User 2
Save to User 3
Save to User 4
Save to User 5
Delete all User memory
User memory not created
User memory created
Input
A-RGB COMP HDMI None
O O O
', presence of user memory can be confirmed as
?SAVEIMGPROF
<User 2 present parameter>,<User 3 present parameter>,
<User 4 present parameter>,<User 5 present parameter>'
").
Saves the current image adjustment value to user memory 2.
Confirms the create user memory status.
User memory 3 and user memory 3 have been created.
- 68 -
WX6000 / SX6000 User Commands
O