Water Supply Pipe And Tank Holder; Ice Tray; Installing The Tank Pipe - Mitsubishi Electric MR-B46Z-W-C Service Manual

6

Installing the tank pipe

1 Insert the tank pipe into the water
tank.
Tank Pipe
Caution
Do not let
foreign objects
block the hole.

Water Supply Pipe and Tank Holder

Once a month
1
Pull out the water supply
Water
pipe and wipe the tank
Supply Pipe
holder with a clean cloth.
Do not pour water into the tank
holder. Doing so may cause a
malfunction.
Tank Holder
2
Disassemble and wash the parts.
Twist and remove the water supply
pipe.
White minerals or chlorine
accumulation may adhere to the parts,
this is not abnormal. Wash off such
substances and reuse the parts.
Easier to disassemble/assemble when wetted
3
W Water Supply W W W W W W W W W W W W W W
Follow the procedure in
P Pipe
reverse to return the parts
to their original positions.
Push in the water supply pipe fi rmly
so there are no gaps.
If there are gaps or looseness, it may
cause a malfunction.
Tank Holder
4
Tank
Packing
Horizontally
So that foreign
objects do not
get inside
Water Supply Pipe
OAH162
2 Connect the tank pipe to the
water supply pump.
Check that there are no foreign objects
between the tank pipe and the water supply
Water Tank
pump.
Check whether there are
any foreign objects between
the water supply pipe, tank
packing, and tank holder.
Insert it horizontally so that
there are no gaps.
Failing to do so may cause noises to
occur, ice to not freeze, and may also
cause the water in the water tank or food
in the refrigerator compartment to freeze.
3 Install the tank packing
Water
Supply
Pump
Tank Pipe

Ice Tray

1 to 2 times a year
Before cleaning, make sure to set "Stop Ice
Making."
1 Open the door of the ice
making compartment
and unlock the ice tray
lo lock lever.
Ice Tray Lock Lever
will appear on the operation panel.
If the alarm sounds continuously when the ice tray lock
lever is unlocked, lock the lever, close the door, wait for the
blinking to turn off, and then try again.
2
Pull the ice tray towards the
front and then remove it.
There is a risk of the water
spilling. Pull out the tray slowly.
3
Empty the ice tray and wash it.
After washing the tray, dry off any moisture.
4
Attach the ice tray
Push in the ice tray until it makes a clicking sound, and
then lock the ice tray lock lever.
will disappear. If the lamp does not disappear, check
the position of the ice tray lock lever and the up and down
orientation of the ice tray.
Locked
When making ice, set the ice making compartment's setting to
29
Tank Packing
Unlocked
.