Assemble The Water Supply Pump; Install The Pipe - Mitsubishi Electric MR-B42S Operating Instructions Manual

Regular cleaning produces clean and delicious ice.
Regular cleaning prevents water stains, molding, etc.
Cleaning once a month
Pipe, Water supply pump, Light-type bacteria removing / lead clean filter
Pull out the pipe.
Twist the water supply
pump to remove it.
The impeller is magnetic.
Wash carefully to remove
all foreign objects.
Steps to bring the water supply pump and
pipe back to the original position

Assemble the water supply pump

Fit the filter into the
cap.
Fit the filter cover's tab
(A) and hook (B) into
the assembly made
in step above.
B
A
Install the impeller into
the water supply pump.
Disassemble and wash the
parts with water.
Pipe
Light-type bacteria
removing /
lead clean filter
Cap
Water supply
pump
Impeller
tab
While pushing
the tab downward
with your finger,
pull the cover off.
Rotate the cap and catch the cap
hook (C)(step ) onto the water
supply pump tab (D)(step
*Make sure that the impeller is in
the water supply pump.
C
D
Rotate
Rotate the water supply pump
(step ) to install it securely and
correctly on the water supply tank.
Reverse procedure to build up
Do not use kitchen detergent
benzene, bleach or other cleaning
products to clean the light-type
bacteria removing / lead clean filter.
The products above give ice odors.
Cover
Normally, the light-type bacteria removing /
lead clean filter need not be replaced.
However, replace it in the following conditions:
· When the filter is clogged by passing
something other than water through the filter
· When the filter is broken
· When the filter is moldy
In such cases, contact the retail store at
which you purchased this refrigerator from.
*If the water tank is prone to get moldy
due to the nature of water, clean the
water tank 2 to 3 times a week.
Improper reassembling might cause failed ice
making or increased noise. Check the following.

Install the pipe

Align the
the water tank.
).
mark
Connect the pipe with the water
supply pump.
*Make sure that no foreign object is found
between the water supply pipe and the
pipe junction.
Rotate
marks on the pipe and
Pipe
Pipe junction
Water supply
pump
23