Mitsubishi Electric MR-B46Z-W-C Service Manual page 52

OPERATING PROCEDURE
Partition for chilled compartment
(15) Disengage the tabs on the right and the left of the partition for
chilled compartment by lifting them up. (See photo 4.)
(16) Pull out the partition for chilled compartment together with the
partition for tank toward you, then lift them to remove them.
(See photo 4.)
(17) Pull out and remove the partition for tank along the groove of
the partition for chilled compartment.
Note:
Attach the partition for tank to the partition for chilled compart-
ment along the groove of it.
Attach the partition for chilled compartment together with the
partition for tank by inserting the convex parts of the parti-
tion for chilled compartment along the rails on the sides of the
refrigerator compartment. Slide the partition for tank along the
groove on the bottom of the refrigerator compartment while
paying attention to the position of the tabs.(See photo 5.)
OAH162
Partition for tank
Photo 4
Photo 5
52
PHOTOS
Tab
Partition for chilled compartment
Partition for tank
Partition for chilled compartment
Rail
Partition for tank
Tabs
Tab
Tab
(16)
Rail
Groove